|
11/07/2010
Peter (74%)
Can someone please advise how many poles this motor has...??
|
|
|
| |
|
Utopia
(74%)
It has 14 poles.
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
|
26/02/2010
winson (31%)
Hello, I have a question for you guys: do you know if this motor fits correctly in the easy glider pro?
Sabeis si este motor cabe perfectamente en el easy glider pro o hay que hacer alguna modificacion?
Un Saludo a todos
|
|
|
| |
|
swessels
(49%)
There should be no problem. A 10"x6" or 9"x5" folding prop using a 3s LiPo should be fine.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
aspim
(60%)
Supongo que coger perfectamente.
Yo lo tengo sin problemas en un Easy (El anterior al PRO).
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
swessels
(49%)
I don't have an EG peo, but it should no problem. Be aware to use a prop with low pitch!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
14/09/2009
SG-1 (97%)
hola!!! suelo montar este motor en un parkmaster,tiene mucha potencia,valido para 3D
salu2
|
|
|
|
|
|
|
|
7/09/2009
Hans-Jürgen (56%)
Hallo,
i am searching for replacment shaft. Can you tell me what shaft fits, please. (Artikelnumber)
Measure: Diameter: 3,175mm Length: 50mm.
Thanks
Hans-Jrgen
|
|
|
| |
|
xero67156
(52%)
This appears to be a one up of the blue KDA motors sold here at HC. It is pretty much a longer "clone" of the 20-XX series of motors. It even comes in the same packaging with the same hardware pack. The 20-__L shaft will fit but it is just under 50mm, not 54mm as stated and has a diameter of 3.17mm (again, off from the stated specs)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
5/09/2009
Michael (72%)
Can anyone explain how to reverse these shafts?
Also, are there any instruction sheets available.
Thanks
Michael
|
|
|
|
|
|
|
|
|
26/07/2009
mtdoramike (67%)
Hi, 'm wanting to get one of these motors, but the mounting holes are on the opposite side. Can the Shaft be REVERSED, if so how do you do it???
|
|
|
| |
|
worldedit
(67%)
I tried to take out the shaft because mine was bent after a crash. Even with a hammer i couldnt get it all the way out. I think they used glue on it.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
27/06/2009
Bellakelpie (43%)
Sorry** should have been a question not a reply.
Is this a 23 amp motor or an 18 amp motor?
|
|
|
|
|
|
|
|
|
6/06/2009
Lund67 (72%)
Hi
I got the same problem as Reduan, I need a link to the right spare shaft fore Turnigy 2217 16turn 1050kv 23A Outrunner. please help
|
|
|
| |
|
Bellakelpie
(43%)
Is this a 23 amp max motor or an 18 amp max motor?
Both figures are quoted above. Most confusing.
Anyone know?
Hobby City**can a representative please clarify?
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
kerrylaw7307
(54%)
I believe this means... up to 18Amps constant, with short bursts ( 10sec ) up to 23Amps.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
taffy_magic (84%)
would this motor be alright for thunder tiger giles 3d flyer weight 265 grams/9.3 ounces they recommend eflight 370 with g/box 6-1 i,m cocerned about torque rollng because it may be too powerful if so what do you recommend
|
|
|
| |
|
worldedit
(67%)
I use this Motor in a 550g (flying weight) 3D plane and it has plenty power. Hovers at half throttle and goes verticel pretty quick. If 265g is you flying weight id recommend a smaller motor.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
nppc (72%)
What this dimensions (27.6 x 36mm) means? What diameter of this motor, motor len and shaft len?
Thx!
|
|
|
| |
|
kerrylaw7307
(54%)
27.6 is the diameter, while 36mm is the length.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
swessels
(49%)
Hi,
the diameter is 27.6mm, the lenght is 36mm without shaft.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
joachim08 (72%)
Do you know the next delivery date ? I am keen to get one of this nice motors !
|
|
|
|
|
|
|
|
|
gman1969 (32%)
how do you reverse the shaft on these motors? If anyone knows, please provide feedback with information.
|
|
|
| |
|
Hans-Jürgen
(56%)
Ich habe erst die Schraube gelst und dann die Welle mit dem Hammer unter verwendung einer 3mm Schraube herausgeschlag.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Raduan (64%)
What are the specifications for the spare shaft? Provide link please.
|
|
|
|
|
|
|
|
|
jean (72%)
Super Moteur. J'équipe mon Multiplex Gémini avec ce moteur Hélice 10x5 et accus Lipo 2200 MAh Zippy. Vraiment Top
|
|
|
|
|
|
|
|
|
Raduan (64%)
What is the recommended timing setting for this motor, low, medium or high? I am using a 30 amps esc.
|
|
|
| |
|
King_Air
(53%)
It depends on the esc. i have the turnigy plush 30a running on it with a 10x6 prop and a medium timing.
greets, king
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Seong Chuan
(84%)
How many watt is this motor rating for?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
