HobbyKing Online R/C Hobby Store : Rhino 1850mAh 3S 11.1v 40C Lipoly Pack

View all comments | (4 threads)

Ask a question

29/07/2010
Lep (58%)
the the width of this battery really 20mm?

23/09/2009
Sigun (38%)
What is the size of the connectors on these new Rhino 40c battery some say 5mm some say 5,5mm and some say 6mm plugs.

Would be good if HC could add this information to the batteries.

/Martin

8/09/2009
Arthur (76%)
Ok just popped a 30c rhino lipo 1350 at 1000 watts and 100 amps with my DO5 racer. Yea I know I know but what are the constant amps and burst amps with these

bastelspezi (53%)
i guess something like 40/60C (constant/10sec)

Nobby (-36%)
Burst is 92.5 amps for up to 15 seconds but what ESC are you using as it seems like a small pack for a 1000watt rig.My 500 Heli runs a 1000W motor and It runs a 6S pack with a 150amp burst pack and about 120amp constant flying 3D, 35amp at hover and to get that from a 11.1volt pack is to much unless its a 5000mah 25C which will give the 125amp nesseary to sustain a 100amp draw without the pack exploding. Hope this helps.. Helicopter have a very high Amp draw when flying 3D so you could get a lot of info from a site like ****archeli****.au and search for fitting high current Lipos.

5/09/2009
TrevJonez (78%)
does charging these at 5c cut away at how many cycles it gets in its lifetime?

Extra Rc (54%)
yes! that will decrease the lifetime of the batt..
personaly I don't charge my LIPOS over 1C

bastelspezi (53%)
i have some rhino1050 40C packs and charge them regulary with 4-5C. no props so far. but i have to say one pack has only 10 cycles the other one 20.

Nobby (-36%)
Yes it does ,how many I cannot say yet (still testing)and I would still stick to charging at 1C myself until I can tell.Perhaps 2C in the New Generation High C rated packs.Will still be a trade off but?.

jacob (72%)
fit this battery in 1 / 16 E-Revo?

Click here to see all comments