HobbyKing Online R/C Hobby Store : Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2)

View all comments | (173 threads)

2/09/2010
dhonext (70%)
I just receive my Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2) BUT THERE IS NO SATELLITE RX. Is this product would be suitable ? http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=8356

2/09/2010
Mikel (100%)
Which battery would be suitable for this Tx? I found two LiPos, but I dont know if they are suitable according to the dimensions. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7346 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9787 Thanks

2/09/2010
dhonext (70%)
I just received my order. Inside the box are: 1 Transmitter 1 Receiver Question: Why there is no Antena included on the box? the antena for the receiver? Please advise. Thanks

1/09/2010
Gonzalo (86%)
I need to settings FLAPERON in this tx, anybody can help me?

1/09/2010
Gonzalo (86%)
How I can setting Flaps in this TX?? Thanks in advance.

24/08/2010
Piotrek9932 (100%)
Hi. I have a problem, I'v got a speed controler without BEC. I connect a power to rx into a battery channel and I want to connect my speed controler too, but then engine don't want work.. Someone know what's I'm doing wrong? (sorry for my English)

19/08/2010
Nadezhda (63%)
I have big problems with "stick expens" (sorry for my English)
When I take away a throttle stick up to the end, the program shows that a stick not in final position. This is not only with throttle, With other channels too most. End points- 120%, DR- 100%, adjustment- ok.
Tried to use the colibration program, but it hasn't helped me. Help me please to correct a problem at last.

***********rcgroups****/forums/showthread.php?t=967207&page=259

Nadezhda (63%)
http://www.youtube.com/watch?v=qZHmjuOj11E&feature=player_embedded

19/08/2010
Ingestr (100%)
I need advise to get contact with my receiver, can not bond them together, I have contact with tx via pc. Red light is blinking at rx, and there is a red blinking led iside the tx, is that normal? Someone thant know anything?

diego Jimenez (88%)
they come allready bond so maybe there is a problem somewhere else, it happened to me. Do you have your ESC on channel 3? Is your battery ok? try without the bonding connector... hope it helps... I can't remember what i did but finally they where bond together

19/08/2010
aizat (84%)
ok i bought this set, but im so confused with the manual, is the set already bound together? or do i need to worry on binding it?

bibiricat (39%)
they are NOT binded together, but binding is easy.
Connect the ESC at Chanel 3 , white wire facing the sticker side, then connect the battery to the ESC.
Start the remote and press the small button on it at the same time , and that's it.

aizat (84%)
cool thankyou, ima try that,i was confuse because the set in the manual is slightly different, but thankyou

diego Jimenez (88%)
it's allready bond, dont worry. * P

aizat (84%)
yes, thankyou all for the replies :D

Neokayros (34%)
Hi, You have to do the binding procedure, because the TX and RX are not binded yet. Follow the procedures described in this page or look on youtube for videos explaining how to do it. Good Luck.

18/08/2010
calee (35%)
Hi friends:
Anybody know if can I use the ESKY Soft-dog (USB PLUG)cable EK2-0900A for PC?
Thanks a lot

17/08/2010
hadatom (84%)
I got this radio for my edf's but am unable to make the 5th and 6th channel work on the rotating pots. Is it basically a 4 channel radio or is there a way to activate these two extra channels ?

15/08/2010
Mark (100%)
Hi Sorry but I am a complete novice so any simple to understand guidance to help me get this radio working would be very much appreciated. I bought this radio a few months back and keep going back and having another go at trying to get it to work. I first plugged the servos and Hobbyking electronic speed controller in and connected up the electric motor. The servos moved fine (albeit not very much and in the wrong direction compared to what I would have liked - a bit of cutting and gluing sorted that)BUT the motor wouldn't turn at all. So I tried downloading the T6 softwrae and the Windows XP driver. Plugged in Transmitter but nothing works. At least it was not much money but if anyone could give some guidance it would be appreciated. Otherwise it will all have to go in the bin I guess.

KRN-977 (80%)
looking that: http://www.youtube.com/watch?v=HEaAmh1-yOo

diego Jimenez (88%)
Look for videos on you tube and download the files in the hobbyking tx page. It's a bit hard to get it to work but when u understand it's easy to reverse channels, etc...

15/08/2010
elchan (100%)
Does this radio support CCPM for helis and gyro sensitivity?

diego Jimenez (88%)
Yeah! it does!

10/08/2010
Hilmi (55%)
does it has mixing?

bradley (50%)
yes but you need to buy http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9043

KRN-977 (80%)
yes, he has mixing in programm services.

bibiricat (39%)
it does, but you need a PC and the USB cord. Just done a V-tail mixing and worked good .

diego Jimenez (88%)
It does but I heard it's not very recommended to do it. It may mess up channels and force crash!

Neokayros (34%)
Yes It has, but needs a computer to configure.

8/08/2010
David (100%)
How long is range of the reciver?

KRN-977 (80%)
range of about 1,5 - 2 kilometers

diego Jimenez (88%)
1 km as far as I know...

Neokayros (34%)
Hi, The range tested is about 900mts but beyond 400mts is hard to see the plane. Good Flights

1/08/2010
Quintin (70%)
Good radio ,but my electric engine only starts after passing half throttle on my radio. VERY ANNOING. What should I do?

Eric (67%)
Have you calibrated the ESC with your throttle stick? ESCs often require throttle stick calibration when getting a new transmitter attached. Just power on normally except have the throttle as high as it can go when you plugin the battery to the craft. You'll hear some beeps, then take the stick down to the lowest position. The ESC then knows the upper and lower limit of your throttle. If that's not it, check the programming with the PC cable and make sure there isn't something going on there.

frostbit (91%)
Had to recalabrate throttle stick after changing batterys in transmitter, as the ESC saw throttle voltage with the new batterys and stick all the way down. Segest if your heading out to fly and figure to change batterys in field after flying a while, that you check TX with model and new batterys befor leaving home. HEADS UP

KRN-977 (80%)
You must try set trymers in programm service

diego Jimenez (88%)
Every ESC needs an adjustment to know the throttle max and min look at your ESC especifications and try to set it. Hope this works, GL!

30/07/2010
steamhead19 (34%)
Is there only one receiver that will bind with the T6A v2 Tx? I have just bought one.
I would like to fly micros indoors so would like a very light weight Rx - is one available?
Any comments most welcome.

Horacio (55%)
I think yes, there is only one compatible receiver for this transmitter. But you can save a few grams by taking off the plastic case and replacing it with heatshrink.

steamhead19 (34%)
Thanks Horacio, I'm one step ahead! I've taken the case off and purchased a length of 20mm heatshrink. Do I go over the pins and let them go through the heatshrink or cut out a piece to avoid the pins? Cheers,

David_L (61%)
Remove the plastic box of the receiver and put it in a shrink tube. It's going to lighter and smaller. The receiver with no plastic box weight 5g. The receiver in the plastic box(as received) weight 9g.

Keith (100%)
The HK-GT2_RX seems to work but only 3ch. I got some for RC car's. I hit the bind and it seem to work. I have not range tested anything. I just got the radios.

KRN-977 (80%)
it's must be receiver by product hobbyking

diego Jimenez (88%)
I think it only works with it's own receiver but you can buy one extra receiver if it's not too heavy!!!

28/07/2010
Jose (56%)
I would like to ask how many positions the 3rd and 4th channel have. 2 or 3 position? Im looking for a radio with 3 position channels. Hope I made myself clear! Thanks! :)

Moss (60%)
2 for the switches.

Horacio (55%)
You can also use the knobs to get a continuous variation instead of fixed positions, if that suits you.

28/07/2010
Brunopracidiu (60%)
Hello is scheduled to have this radio when available?

27/07/2010
GOURA (40%)
How far does it send the signal to a receiver,for sure ?

dertuman (58%)
I found that at the very least a good three to four hundred meters. At least a thousand feet.

26/07/2010
Ramen (36%)
How long it will take for you to have stock again? I'm a buyer from Europe.

25/07/2010
cole (14%)
can i use this on a 3d model

dertuman (58%)
Of course!

diego Jimenez (88%)
yeah, no proble, I do!

24/07/2010
DJFishinman (56%)
Does this not come with the dual receiver like the exceed one?

rcdragon (-75%)
no dual receiver

dertuman (58%)
Indeed it does.

diego Jimenez (88%)
No, it's just one receiver!

24/07/2010
ryan.perera22 (87%)
Is it just me or does it seem like after -20 stock the stop updating the number. I bought this when it was at -20 stock and it still is. So does this mean the actual stock could be -100 ? has anyone seen a stock lower than -20 on any item?

spartas phalanx (72%)
Yes i believe that that is the case or that it says back ordered after a certain time.

David_L (61%)
It's back in stock now... I have 2 of them.

23/07/2010
FABIO GIL (-9%)
I have bought this system a while ago and it came without the now included CD. Where can I down load the program from? Should I complain with HK about it? Thanks for any help.

bradley (50%)
look under the files tab

David_L (61%)
***********flysky-cn****/pic/down/FS-CT6ADriver.rar

diego Jimenez (88%)
Look for the "files" tab at the HK Tx page, it's on the bottom. Good Luck!

14/07/2010
Adriano (37%)
I was wondering if the radio comes with battery for the RX and TX, thanks

ssacer (43%)
No, package includes Tx, Rx, bind plug, cable for programming and CD with software

Robert (45%)
Run like hell, this and the exceed rc version do not work with XP, Vista, or Win7.

No driver works and the computers never recognize the device.

carstent90 (55%)
No, for the Tx you might check that one: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9787

Mister X (100%)
in the remote normal batteries fit in,the rx is powerd through your conected battery.

diego Jimenez (88%)
No, you'll need 8 AA for the Tx and the Rx should work with the heli's (or wathever) battery. Bye!

13/07/2010
qualesh (60%)
How can i switch between rate mode and head hold mode with this transmitter, is it possible to assign a button for that?

ssacer (43%)
Add mix for variable A or B to channel 5, and when you turn the knob, gain change

Sam (44%)
The above is correct. Just plug the remote gain into the ch 5 slot on the rx, then mix knob a or b with ch 5 and set max and min to 100 and 0.

13/07/2010
bob74 (56%)
unable to program this transmitter:

I bought this 6 chanel system without the required USB cable... Then I ordered the cable.

I am still unable to program the transmiter from a win XP computer with the file available.

Does anyone know what to do ?

Robert

ssacer (43%)
Download this driver ***********silabs****/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
And try this software: ***********sgr.info/usbradio/download.htm you must check what serial port is asigned to cable and select it in programming software

poffe_dk (56%)
THANKS ssacer.. I couldnt get the software that followed on the CD to work. But with the software just above, I have a connection.

diego Jimenez (88%)
dowload the new files from the hobbyking website, at the same page than the tx on the bottom. Good luck!

Neokayros (34%)
Robert, you have to use the "CP210x_VCP_Win_XP_S2K3_Vista_7" program to the win xp recognize your TX, then use the T6Config to config and set you choices. Good Luck

13/07/2010
ssacer (43%)
I have problem with my HK-T6A v2. When throttle and throttle trim is all the way down, throttle on my throttle curve is on like 15%, and when it is all the way up, throttle is about 90%. At the moment I turn my Tx & Rx on, my motor starts. Throttle curve is 0,25,50,75,100 I have tried to callibrate it with T6recalibrate, but it is the same. Please someone help! Only thing I could do is put throttle curve 0,0,30,65,100 so i could fly.
Thanks!

Dillzio (97%)
you need to calibrate your ESC to the throttle range of the radio :o)

ssacer (43%)
My throttle range with ESC was calibrated, But I have solved it with digital radio sotware

Sam (44%)
I had the same issue. My esc had a programable throttle range though, so i calibrated it that way. Im still a little messed up in some of the programming but i can fly.

diego Jimenez (88%)
i have the same problem but i think you can make it go a bit further configuring extent to 120%. hope this helps!

12/07/2010
berkay (56%)
Im planning to buy Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2) but Im not sure I will find compatible receiver for it 3-4 months later. Do you guaranteed to supply its receiver? For example v1 receivers are out of stock and v1 transmitters are rubbish now.

11/07/2010
Ben (62%)
Hello
Im new to air planes and was wondering if i can buy a 6ch TX/RX and use it on a 4ch airplane

meatom (56%)
Yes you can!

Sam (44%)
Yep :)

cd_torr (39%)
Most definitely. Most people buy 6 or 7 channel radios to use on planes that require only 3 or 4 channels. It is always nice to have extra channels should you buy more complex planes that have flaps or retracts, which require those extra channels.

diego Jimenez (88%)
no problem!

11/07/2010
e2tho (67%)
Hi, Can I use this Tx/Rx for my HK-450GT CCPM 3D..??
thanks

Gian_C (47%)
Yes. I am using with hk-450v2.

Sam (44%)
Yes u can. It is what i am using on mine.

e2tho (67%)
al last, I got my package today...what a dissappointed...when I open the box, I found the antena Broken, seem to me that they putted the broken Transmitter inside the box n send it out, when I received it, the box seem ok from outside....I didn't expect it, hobby king really disappointing......

10/07/2010
andres (64%)
I have a problem with my this RC. it has interference. It was demolishing my model aircraft and still has me without sign. To which this owes? Is it a problem of the RX or TX? And since can I avoid this??

Jacob (89%)
it is a low battery glitch not interference. never fly below 3.4 V per cell on the lipo in the plane.

10/07/2010
cole (14%)
can i use this bundle with the mini f86 sabre for sale

9/07/2010
Jacob (89%)
Has anybody (manually) tested the actual range of this transmitter and receiver?

9/07/2010
AEROBJ (59%)
Hello everyone, I wonder if this radio works with batteries or 8 and rechargeable battery. how many volts and charge him. Thank you.

Jacob (89%)
It will work with any 3s rechargeable lipo. you would have to open it and solder a positive and negetive wire out of it. 1800mah turnigy is a perfect fit. I would guess it also works with typical AA rechargables too that you can pick up off the shelf

UrsusRF (28%)
It need 12V. You can use any batts you want - NiCd\NiMh\Pb\LiFe\LiPo\LiIon

Sam (44%)
It takes 8 batteries, and calls for 12 volts. A non rechargeables is 1.5v so 8 equals 12v. I am using rechargeables and they work, but they only charge to 1.2v so 8 equals 9.6v This means that you have to charge them more than you would have to change batteries, but it is a lot cheaper to use the rechargeable kind.

ssacer (43%)
Yes you can, i am using them in all my Tx, including this one!

diego Jimenez (88%)
it works with 8 AA batterys and has a charging connection.

9/07/2010
Steven (45%)
Hi

I have purchased this controller & usb cable however i'm having issues where the controller is freezing in the software... I will not allow me to program and program keeps crashing..

I've installed the drivers/software on 2 computers and same result...

I don't know if the issue is the controller or if it is the usb cable causing the issue... can anyone please help me with my issue

thank you

frostbit (91%)
I had to use the one entilted
Driver for XP USB Cable (Not freeze with
The others frose keep at it,

Jacob (89%)
connect the cable using a 4 port USB hub.

MATTIASMTB (44%)
you have to instal the driver for xp first, driver for windows 7 after, and then plug usb cable, instal t6config, swich on the radio, open t6config, settings, choose COM port, and it will work.

diego Jimenez (88%)
try downloading the new files from hobbyking

8/07/2010
osherov79 (50%)
Hello! I recieved the HK-T6A V2 2.4ghz system and the cable for the simulator but it doesn't work. I have windows 7 and I have tried all the drivers that you recomended on your website but nothing works. How can you help me?

Shura (23%)
I felt different drivers, and only that is stable on any version of windows *******depositfiles****/files/a5nq2zbgi

This customer was awarded a credit for their answer.

Sam (44%)
Did set which com port the cable is plugged into and which one the software is talking to?

Shura (23%)
After installing the driver to select COM port number 3. T6config works with this. To work with the simulator except that the driver needs the program Virtual Joystick COM Driver PPJoy and T6sim. In the archives of these programs is specified as all set.

29/06/2010
kspuur (59%)
can i fly a heli with this, and if i can't, why??

lietuvys (69%)
Yes, you can. It has plane and heli modes.

killioughtta (-12%)
That depends on your ability :D

UrsusRF (28%)
Yes u can

28/06/2010
Conner (36%)
He's talking about the new version, not mode. I don't see any diffrence either.

Click here to see all comments