|
12/04/2010
CeeJay (82%)
Someone please post the dimentions of this cell?
|
|
|
| |
|
DOUG
(24%)
I have 5 of these cells, I have em down to 2.35mm x 1.5 x 5.78mm with tabs and seams folded up and including leads across the top. Cells out of the box, 2.9mm x 1.5mm x 4.5mm
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
tony.s
(63%)
length were terminals exit 27mm
width 13mm
thickness 3mm
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
ahsis
(27%)
30*15*4 (mm)
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Alex Ng
(48%)
hi there, it is 28mm x 13mm x 4mm
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
7/12/2009
GGabor (36%)
Hello,Can it be used in Nine Eagles Free Spirit micro heli?The original battery code is: NE4901001if yes, then what kind of connectors needed?thanks very much for your answers
|
|
|
|
|
|
|
|
|
13/11/2009
Jonathan Ott (47%)
Are the tabs on these solderable?
|
|
|
| |
|
helicopke
(52%)
hi Jonathan, yes they are, I have the 240 mah bats from HC and made a 2 cell pack (two bats in serial), works great but be careful not to put stress by pulling on the tabs since they are very weak, once soldered I tape the connections and also wire to bats which avoids stress on the tabs, good luck and keep flying !
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
slimage
(27%)
I had no problems 60/40 rosin core or silver solder
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
3/11/2009
kaps (77%)
how would u hook this up with a um p51?
|
|
|
| |
|
kap
(63%)
yea that is a good ?
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
slimage
(27%)
cut stock connector off with some wire long enough to make new connections using PRODUCT ID: HXT0-8Gold use opposing terms for pos and neg then do the same on the plane now you have a sub connector for thoes pesky batteries with the goofy little plugs and you can do the same on the HK batteries
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
6/08/2009
Fiddy$Trainer (89%)
Can someone list how to do thise in 2S configuration? Do you use JST Female or Male, what gauge wire and how do you wire it if I want 2 cell 100mamp?
|
|
|
| |
|
Pvtzemerak
(42%)
im wondering the same thing. You should use Male JST for it. and i would recomend 16 or 20 AWG gage wire.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
robson_silva (68%)
facilitates the construction and point of cg
|
|
|
|
|
|
|
|
|
Andy-W (63%)
I'm using the Minium charger that you get with their Cessna. Works great.
|
|
|
|
|
|
|
|
|
jordan (56%)
how do we wire up these batteries so i can charge them?
|
|
|
|
|
|
|
|
|
|
|
|
|
Fausto (39%)
How can i charge this battery?
|
|
|
| |
|
Tommy
(65%)
Hi.
I use 3s packs in my mini mig 29.
And my charger give minimum 0.5A
So I need to charge paralell 4-5 packs.
problem is when you connect the packs together they need to be the same voltage maybe +- 0.1V
But it works great.
/Tommy
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Beaufighter
(-25%)
Or get a charger that can charge a 1S battery at 0.1A, if you need it for 1S application.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
Smeagle (78%)
To the guy how is using these with 8A in the Review page: That would be 80C - MUCH TOO MUCH for this cell! Maximum 2A.
- Oliver
|
|
|
|
|
|
|
|
|
PAULO (63%)
Can I use 1C charge current?
|
|
|
| |
|
magnusEl
(80%)
Yes, you can charge with 1C, that is 100mA, but I gues you know that.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
natifly
(77%)
are there any chargers which works with a little lower current of 1C to have more safety?
thank you
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
.jpg){kind=small}
