|
19/05/2009
aymarun (73%)
Hello,
I received the parcel yesterday and everything is good except the 2 servos towerpro mg946R.( #MG946R/6222 Towerpro MG946R)
One do not work.I tried it with several receivers and even with a tester of servo. nothing !
The second work but not behind my fail safe. why ?
I use a Hobbyking 2.4ghz Tx/Rx with my 3 electric cars and i use Towerpro servo MG995 without problem, even with fail safe.
Is the servo really digital ? Is it compatible with my Tx/Rx ?
Thank you for your help.
Cordially.
Aymar.
|
|
|
| |
|
gaber
(82%)
aymarun,
a digital servo is programable!!!
i am sure if you have a divice to check the servo's you will see a difference in the value's.
ith is nothing more than that!
check aymarun and you whill see.
differend valeu's in differend servo's giving this problems.
i wich you a lote of succes
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
aymarun
(73%)
Gaber,
I don't understand ! How to program the servo and with which?
thanks
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
|
ofirby (62%)
Hi,
I'm using Towerpro MG946R 12kg High Torque Servo and HXT 10kg Servo (metal gear),
both of the servos not working with Y connector.
I connect 2 Towerpro servo to Y connector and its doesn't work, when I reconnect one of them, the second one
Work. Same scenario with HXT servo.
I also replace receiver and Y connector, still got the same problem.
When I connect 1 Futaba servo and 1 HXT / Towerpro servo to same Y connector its working.
The problem occur only when I connect 2 HXT servo or 2 Towerpro servo to Y connector.
Any one familiar with this scenario / problem ?
Thanks
|
|
|
| |
|
gaber
(82%)
MY FRIEND?
it is a very strange problem?
i am already 30 years a mecanik and i can thel you this is a polarity problem.
you have to watch out very carfully that you dont miss in the polarity.
its the only declaration i can give you!
ith is posible that somwone change ore make the cable a little bith longer in the past.
so your eye's see the same colour buth in reality they are changed!!!!!
verify very whel and you whil see.
its the only solution and logic to me.
i use y-cables and had the same problem twice.
and yes i made a mitake by changing the cable's.
thats experiens ?(30 years).
leth me now somthing?
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
rgmanica (82%)
Come just with 2 servo arms?
|
|
|
|
|
|
|
|
|
kowalkowski (84%)
Dir Sir,
in few weeks i will buy some towerpro MG946R for my spitfire 1/4 scale.
I would install SWB servo arms with the servo but which? SWB Servo Arms for Futaba or for JR or hitec can i install with the servo?
thanks a lot
yours faithfully
kowalkowski jean christophe
|
|
|
| |
|
gaber
(82%)
kowalkowski,
ith depence how big he is and how longyou have to watch out very carefull that everything fits very whel !!
you can use the two arms iff they are the same strangt.
watch out for flutter!!!!
scale models are very sensityve to flutter
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
