|
11/05/2010
dukepapas (46%)
Hello,
have you shafts for this motor? add link at dukepapass*hotmail**** thnks!!!
|
|
|
| |
|
OBADEK
(98%)
Shafst is 3,175mm and 15mm long
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
30/12/2009
ministeve2003 (82%)
try a apc 8x8e, it makes my nitroplanes p51 very fast and still has plenty of thrust... Forgot to bench test it, but using 40c rhino packs and full throttle flights, everything comes down cold... (guessing right at 14-15amps)
|
|
|
|
|
|
|
|
Matthew (55%)
I need help in understanding the numbers in Edney Halaginski's post in the review of this motor. It says:
"Prop Thrust(g)/Temp(C)/Amps/Watts
8x6GP 620 35,5 10,51 11,26 119,6".
I am interested in running an 8X6 prop with an 18A ESC with this motor. He has done the bench testing, but there seems to be way too many numbers there. Anyone know how many amps the 8X6 prop was pulling according to his test?
|
|
|
| |
|
HarryNator
(86%)
I think it pulls 10,51 Amps.
The 11,26 is the Voltage of the LiPo.
I think the Declaration failed, so it sould be Prop Thrust(g)/Temp(C)/Amps/VOLTS/Watts
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
HarryNator (86%)
Hello,
is it possible to rebuild this one, for mounting it in front of the motor frame? So it is on the picture, it's intended for mounting it behind the frame.
Thanks!
|
|
|
| |
|
joanwa
(19%)
yes, under certain conditions it can. the picture shows the side where it needs to be mounted. if you want the shaft popping out of the other side, you can squeeze it threw it and lock it afterwards. however this works only for a pusher config since the clip can't be fixed on the shaft anymore. it works great for me! P.S. get proper tools to squeeze the shaft and do it carefully, the can could be bended otherwise...
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Patrik
(45%)
Yes, i have it on my Raven
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
RiMr71 (68%)
Hello,
have you shafts for repairing, for this motor?
|
|
|
| |
|
OSEIAS
(84%)
You can buy at this link: ***********hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=7202&Product_Name=KDA_A22-**L_motor_accessory_Pack.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Patrik
(45%)
No, only shaft for invert mount. The shaft is shorter then normal.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
epyblast (68%)
Is this motor valid for this mount?:
http: // www . hobbycity . com/hobbycity/store/uh_viewItem.asp?idProduct=6782&Product_Name=Stick_mount_10mm_stick_/_3g_weight
And, what's the diameter of the prop adapter?
Thanks a lot!!
Thanks!!!
|
|
|
| |
|
ministeve2003
(82%)
try a apc 8x8e, it makes my nitroplanes p51 very fast and still has plenty of thrust... Forgot to bench test it, but using 40c rhino packs and full throttle flights, everything comes down cold... (guessing right at 14-15amps)
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
ministeve2003
(82%)
Ok, Checked it with a wattmeter, 11.6volts 15.4amps 180watts... runs cool...
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
.jpg){kind=small}
