|
12/09/2009
patrice (34%)
here
***********hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=7840&Product_Name=Folding_Propeller_5x5_W/_Alloy_hub_30mm_/_3.0mm_shaft
|
|
|
 |
|
|
 |
|
|
20/08/2009
david in japan (-16%)
where can i find the 5X4.3 prop on this website?
|
|
|
| |
|
patrice
(34%)
there s a 5x5 folding prop 3mm working very well on it. i use it on a cox f4u warbird...
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
helicopke
(52%)
which motor, battery, servos,RX and ESC do you use on the cox 4fu warbird ? I am going to buy the cox micro f4u or similar, and I am looking for a full powerfull brushless setup (need for speed =:-)
Thx for your feedback.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
helicopke
(52%)
Was thinking of maybe the AX 1806N 2500kv Brushless Micro Motor (19g) or C2222 Micro brushless Outrunner 2850kv (15g)? HK sells nice Alu 3mm shaft double grub adapters with Alu spinner PRODUCT ID: GS0154M and also one I think is a single grub PRODUCT ID: JJ3.0
I used a 2 grub 1.5 mm adapter (PRODUCT ID: GS0151M) and GWS 5 x4.3 prop for my Sukhoi 26M also ougth from HK and it works really well ! All helpful feedback is wellcome guys, fly hard !
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
Turbobeaver (97%)
The product number for the above mentioned prop saver is:
0R019-00502-3M
|
|
|
| |
|
eglider
(54%)
It works!
Strange sort of prop adaptor, looks like a prop saver but isn't, however could be altered with a file if required.
Will fit any of the 4mm inside diameter props
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Turbobeaver
(97%)
Graham,if you read the reviews for this prop adapter,you will find one where one gentleman has actuallly filed down the end a bit to allow the prop a better chance of actually being saved in a crash.It still centers the prop but now allows it to pivot and pop off in the event of a crash.Nice to hear that this is the prop adapter to use on this motor for the smaller GWS DD props.Thanks for the update dude!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Turbobeaver (97%)
It seems that I over looked that prop saver.It may possibly work on the GWS DD props and this 3mm shaft.Keep us posted on the prop fit when you get it.Thanks for bringing that to my attention Graham.
|
|
|
|
|
|
|
|
|
eglider (54%)
Hi Mark, thats the same question as above I think. I've ordered this adaptor for the small GWS dd props. ***********hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=4324&Product_Name=Prop_Saver_w/_Band__3mm
Not arrived yet so cannot confirm this is ok, but will confirm when it arrives.
|
|
|
|
|
|
|
|
|
Turbobeaver (97%)
I see that there have been reviews done using the GWS 4.0x2.5DD prop.My question is,how did you mount this prop on this engine?United Hobby does not sell a 3mm prop adapter that will work on this series of props.
|
|
|
| |
|
Turbobeaver
(97%)
to answer my own question many months later,yes they do now.Check it out here:
***********hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=8237
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
eglider (54%)
Which prop saver is suitable for using this motor with a GWS 5x3 prop?
|
|
|
|
|
|
|
|
dattatray (40%)
Do have any data of Thrust(g/oz) of this motor generate for different combination of Volatage & Propeller
|
|
|
|
|
|
|
