HobbyKing Online R/C Hobby Store : FC 28-22 Brushless Outrunner 1200kv

View all comments | (28 threads)

Ask a question

29/07/2010
rcdragon (-75%)
wow stock updated after 19 days thank u HOBBYKING

Andrea (100%)
Great motor for this price!!! Is super powerful

26/07/2010
munsaf (35%)
how I rewind this motor and what is the number of turns of wire and which number of wire i use in this motor

rcdragon (-75%)
***********rcgroups****/forums/showthread.php?t=757001

KESTAS (30%)
I dont know

18/07/2010
rcdragon (-75%)
when will be it back on stock .is it stocked regularly

KESTAS (30%)
now it in stock I bouhgt one of them 2010.08.25

9/07/2010
Aremon (34%)
Any prop sever or mount are includet?

alex tan (54%)
no prop saver and mount include, you can get a 3mm propsaver and a GWS motor mounting, it run well on a GWS 9x47 prop with a 3 cells battery

Dmitrij (30%)
No it`s not included. In a package you have ONLY the motor.

Mr Ed (34%)
You get a firewall mount as pictured, but nothing for a 10mm stick mount. You also don't get any kind of prop mount or prop saver with it, but they are cheap enough to buy. Ed

Fabiomel (-3%)
No, only the motor.

4/05/2010
Harold (28%)
Is a prop adapter included with this motor?

Larm08 (71%)
No, unfortunately.

Sidney (36%)
no, prop adapter you can buy here: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5677

Boris (46%)
No, with this motor is no adapter included ?

DJ FERRAZ (68%)
No, u need buy one

Stefan61e (63%)
No, its only the Motor without any prop adapter.

Mr Ed (34%)
I never received anything with mine. Just the motor.

Michael (63%)
There is no prop adapter included with this motor. It is shiped as it is displayed on the picture, the motor in a plastic bag.

fordfm (46%)
Not prop adapter dont included with this motor.

jamming101 (48%)
No prop adapter is included, what you see is what you get* just the motor, no connectors, plugs or adapters.

fordfm (46%)
not prop adapter dont included with this moto

mikra (56%)
Sehr guter Motor, fr diesen Preis einfach unschlagbar. Mit einer 7x3,5 Latte bleibt der Motor kalt. Nur zu empfehlen

alex tan (54%)
no. prop adpt not included

Dmitrij (30%)
No it`s not included. In a package you have ONLY the motor.

Fabiomel (-3%)
No, only the motor.

KESTAS (30%)
no it not included

20/04/2010
MacGyver (51%)
Does anybody know which ball bearings fit this motor?
Are these replacement ball bearings or equivalent available at Hobbyking for purchase?

Thanks

karolpenconek (77%)
It is 693 ZZ bearing (3x8x4mm).

I don't see this bearing on Hobbyking, maybe you can ask in your local shop

Andreas (67%)
The upper one is 6-3-2,5 mm (3 is the hole in the middle. The other one is 8-3-3. You cant find them by HK. Look at Ebay. Price about 2$ for one. I changed a lot of the top bearings after a crash. It is easy to do.

KESTAS (30%)
I dont know

6/04/2010
MacGyver (51%)
OK =), now I understand.
1) Take a 1.5mm "L" hexagonal screwdriver*
2) Loose all the screws*
3) Remove the inner core by releasing the "C" elastic steel clip from motor shaft*
4) Easy and gently move the shaft backwards about 14mm (besides the screw that holds the shaft there is some kind of threadlock-remeber to add when mounting again)*
5) Remount the motor,
thightening the screws and adjustin the rotating body close to the bearing*
- After reinstaling the inner core, put the "C" clip on its new position already marked on the shaft, which is 14mm from the older position*
6)TaDa. You have the shaft reversed.

I use this motor on my red extra 300 and it looks great.

Regards from Brazil

Lumaflap (69%)
That's what I needed!

Thanks Ciampa!

16/03/2010
Lumaflap (69%)
Hi,
Is it possible to reverse the shaft on this motor? Thanks!

MacGyver (51%)
Hi, YES! Just invert two wires (any) yo will get the spin invertion.

Lumaflap (69%)
Thanks, but I do know how to reverse spin inversion, I just want to know if someone has moved the shaft so the motor can be inside the plane, with shaft going through firewall.

It's mainly aesthetic, otherwise the motor works great on my Troll.

Thanks!

MacGyver (51%)
OK =), now I understand.
1) Take a 1.5mm "L" hexagonal screwdriver*
2) Loose all the screws*
3) Remove the inner core by releasing the "C" elastic steel clip from motor shaft*
4) Easy and gently move the shaft backwards about 14mm (besides the screw that holds the shaft there is some kind of threadlock-remeber to add when mounting again)*
5) Remount the motor,
thightening the screws and adjustin the rotating body close to the bearing*
- After reinstaling the inner core, put the "C" clip on its new position already marked on the shaft, which is 14mm from the older position*
6)TaDa. You have the shaft reversed.

I use this motor on my red extra 300 and it looks great.

Cheers from Brazil

Lumaflap (69%)
Thanks Ciampa, I have reversed the shaft and installed the motor inside my Troll : it looks great now!

26/02/2010
Alan (76%)
Has anyone tried fitting the spare towerpro threaded shafts to these motors? Although softer the threads come in handy and shafts longer.

25/02/2010
Mauricio (45%)
do not come with protective Prope?

Fabiomel (-3%)
No, only the motor.

9/12/2009
AlFu (53%)
An little counsel.
Glue the the mount flange with Pattex Powerglue classic on the motor. It would prevent the motor from shakeing.

Ein kleiner Tipp.
Klebt den Montageflansch mit Pattex Kraftkleber classic an den Motor. Dass verhindert dass sich der Motor lockert und zu wackeln anfngt.

18/09/2009
Guermonprez (59%)
Hi,

I'm looking for spare shaft for this motor. Somebody knows where I can found it ?

Thanks for help

KillerGX (63%)
***********headsuprc****/servlet/the-1369/Motor-Shaft-for-the/Detail

KillerGX (63%)
go to HeadsUPRC dot com

then look for replacement shafts for the Emax 1300kv motor

Andreas (67%)
I make them byself. Take a 3mm round steel.Cut it in right length. I tap a threat at the upper side so I can fix the prop with a female screw.

larryross (84%)
Headsup RC

8/09/2009
KillerGX (63%)
Is this motor powerful enough for the Skyartec Cessna 4ch foamy that the website sells?

and.... Where can I get some spare shafts for it?

ishady (63%)
Saw all the review, I assumed it will be enough to power the Cessna (I like the Cessna too).
The problem are both the Cessna and this motor are all out of stock.

Andreas (67%)
I make them byself. Take a 3mm round steel.Cut it in right length. I tap a threat at the upper side so I can fix the prop with a female screw.

30/07/2009
Filipe (63%)
I'm using this motor with a Hobbyking 25-30 ESC and at some point the motor starts to "choke". Does anyone know what the problem may be?

ishady (63%)
Funny, my friend (which bought the motor from me...he3) experienced the same thing, I just found that the wire are not soldered correctly to the motor (or magnet, sorry I am no-techie)* please check the wire both to the motor and the esc.
Hope you find the problem.

Alan (76%)
IMHO Sounds like your ESC timimg is set wrong.

Andreas (67%)
Try another ESC

Calvin (59%)
It could be: Shorting wires Broken wires ESC troubles (ive found the Tower Pro 25A works good with this motor) **** jamming the motor up or a bad bearing (these magnets will suck metal particles out of anywhere!) If you are running it with a propeller your ESC or battery, or motor, maybe overloading and causing it to "choke."

1/06/2009
Andren (73%)
i want to use this motor on a slofly 28 and 2s750ma battery what prop should i use

Fabiomel (-3%)
How heavy the plane?

BigTradioman (81%)
I am building a 1.9 meter span all foam C-130 expected all up weight will be around 2 KG. Would 4 of these motors be enough with a 3s 3300 Li-Po? If not what would you suggest?

Alan (76%)
It will strugle. Look for a motor under 1000kv that will throw a 10" prop. lower Kv -bigger prop.

SamB125 (63%)
is the grub srew the screw on the mount that screws into the shaft? What kind of grub screw goes into it, mine came with only one screw and made my plane crash :(

Cptdragn (78%)
Yes, those are grub screws. I've flown a many birds with only one because either i lost the other one or it fell out somewhere between being made and I getting it. That was why I was asking what size they are so I can order spares.

handfistrc (77%)
How do you remove the mount from the motor so i can attach it to my firewall?

Also

rcalldaylong (88%)
there's 2 grub screws on the side that you you remove and the mount will come off.

AlFu (53%)
The larger problem is to keep the mount on the motor.
4 screws would be better *)

Alan (76%)
I agree Alfu.Where practical I fit my mount to a circle of ply slightly larger dia than motor (after enlarging holes in backplate). then scrw ply to firewall. also fix wires to ply. this way i can perminently araldite motor to mount, and remove with ply as reqired. Alen grub screws are not adequate.

Cptdragn (78%)
what is the size of the grub screw that mounts the motor?

rcalldaylong (88%)
good old 1.5 mm

Cptdragn (78%)
Thanks Cha, now I know what size to order.

ravidguy (22%)
Hi, Does it include the 3 motor-ESC connectors ?

rcalldaylong (88%)
no it does not. just plain wires.

handfistrc (77%)
I have a foam Fokker III Eindecker
It came with a 300 brushed motor and a 10 oz. flying weight
Will this motor work with it?
***********hobby-lobby****/eindecker.htm

thanks

rcalldaylong (88%)
it will be a rocket on this motor. use a 3S around 500-750mah. I have mine on the electrifly Riot at 8oz with a 1000mah,...and AUW is 11 oz. The thing is a rocket using a 8x3.8 APC

royramos (63%)
how to identify the cable color coding?

Beaufighter (-25%)
It is a brushless, wiring does not matter. Three wires from esc, three wires from motor, just connect. If motor turns in the wrong direction, change any two wires (not three)

Daniel (39%)
Is it possible to use this Motor with 3S Lipos on a EPP-Slowflyer with 1m wingspan (Hacker Zoom Zoom 4D)?

If it is possible, with prop should I use?

Sterling (57%)
I am running this motor on an Infineon i3D biplane with an auw of 11 ounces(plans on RCGroups****)and have used a 9x4.7 with 2s1200mah and 8x4.7 using a 3s800mah. Not tons of power for 3D, but would be fine for Slowflyer

Victor (63%)
con una 8*6 funciona bien

Victor (63%)
Yo lo tengo(2822)1200Kv en un YAk 54 depron 3D propeler 8*6 y
funciona lipo 1500 3s 20c sale de la mano a 1/4 de Gas.

Janus 35 (67%)
Did you know if we can have spare shaft?

Tahnks

rcalldaylong (88%)
I've heard people say the shaft for the 24 gram Hxt motor will fit this one. haven't tried myself. But on the good side, I tried cutting into this shaft, and it is much harder then the towerpro ones. Shaft seems to have a thic layer of hardened metal which was very touch (about 1/4 of the shaft is hardened). it dulled my hack saw blade and I had to use a dremel to cut it.

unitedfun (47%)
Yes it will run on a 2cell battery, but with less thrust. You can run a larger prop to help increase the thrust. Build a thrust stand and try different prop combinations to get the best performance from your motor.

the lurker (60%)
will it work on a two cell lipo?

slowflyer (63%)
Some data with 2S (I was interested too, for sing a light battery):
prop thrust A V RPM
7x4 APC 260 5,26 7,35 8150
8x3.8SF 360 7,61 6,94 7100
9x4.7SF 430 9 6,68 6150

Pascal (63%)
Hi there,
do anybody know, the prop mount is included in this offer?
greets from Lostau- Germany
Pascal

unitedfun (47%)
I bought 4 of them and they do not come with a prop saver you will have to buy it seperately. You will need a 3mm prop saver.

Cptdragn (78%)
they don't have one. the ones I use are
https://****hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=5122
and
https://****hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=3738

sarg (48%)
Will this motor run with the 30A ESC I already have? Thanks.

Cptdragn (78%)
I've also run this motor on 18 and 20a ESC's. It's how you set it up with battery and prop that counts. Like unitedfun has already said. Make youself a motor thrust test stand ( they are easy to made and can be made of wood ) and get a good watt meter such as this one.
https://****hobbycity****/hobbycity/store/uh_viewItem.asp?idProduct=6380
you will get the most bang for the buck without burning up your motor or ESC

Victor (63%)
si seguro,yo utilizo un CES 30A

Click here to see all comments