|
14/06/2010
Alono (55%)
Someone knows the size of the connectors?
I'd like to extend the wires and I need to order new connectors.
Thanks !
|
|
|
| |
|
Firedog
(50%)
3mm gold connectors
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Tomer
(50%)
If I'm not mistaken, these are 3.5 mm connectors. This is the standard in most motors.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
Tomer
(50%)
3.5 mm
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
9/06/2010
IngoH (69%)
Is it possible to change the shaft of this motor without destroying it? I would try the shaft of an 35-48 outrunner motor. The diameter of the shaft inside the motor is 4mm.
|
|
|
| |
|
matthieu93160
(79%)
hello , it's possible to change the shaft ??
thanks a lot
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
22/04/2010
abel262 (64%)
someone know where i found a shaft for this motor??
test 11.1v 6x5 430w
|
|
|
| |
|
IngoH
(69%)
some screw driver have a shaft of 4mm. I took an old screw driver, cut it to the correct lenght. Fits perfect. Only the end for the propeller has 3.17 mm. Inside the motor the shaft has 4 mm.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
22/07/2009
ssmith456 (81%)
Has anyone done any tests with this motor to get amp draw and thrust results for different cell counts and props. If so can you post
|
|
|
|
|
|
|
|
|
3/07/2009
BearPaw (42%)
Does anyone know how many turns this motor has?
|
|
|
|
|
|
|
|
|
30/06/2009
BearPaw (42%)
Hello all,
I would like to know is it possible to use this motor in car? To be more specific, is it possible to use it with EZ-RUN 35A car ESC?
Thank you,
Nikola
|
|
|
| |
|
boss-fet
(41%)
Yes it will work fine with a 35a ez-run esc. Set timming to 11.25 degrees.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
10/06/2009
nightgash (47%)
Shaft seems to be 3.2mm not 3.175mm
|
|
|
|
|
|
|
|
diego (45%)
I would like to know if you can replace the engine ordered with questo'altro HXT2445-3790 - HXT 2445 (370L) 3790kv as the diameter of 28 mm motor ordered. can not be used in helicopter ordered.
then I would have opted on this engine HXT2445-3790 - HXT 2445 (370L) 3790kv which replaces the engine ordered HXT 2845 (380L) 2700kv Brushless I.
no matter for the price difference.
thank you
|
|
|
|
|
|
|
.jpg)
