|
|
|
|
This motor is excatly what I was searching for. I use it in a Depron Pilatus PC6 (home made), 1,60m wing span, flying weigh is more than 1kg (1,2 with my camera). It turns a 9*3,8 prop. I use it with a 40A oemrc ESC and Hobby-city 2500mAh 20c 3S lipo. I fly about 10 minutes with a battery (cells curent drope to 3,8v), half trotle is enought power to fly, 3/4 trotle and I feel that my plane flies realy too fast...
It doesn't come hot during fly (at half trotle).
There are juste one problem, hobby-city sent me this motor on the brand Turnigy, it looks exactly the same has this one, same size, weigh, caracteristic. I was surprised but it work's.
It comes with a spinner no need to buy an other, but hole prop must me 6mm, SF props suit perfectly.
After about 10 flys a can say that it's good product at good price!!!
28 people like this review.
|
|
|
just done some more tests full throtle for 5 secs
9x6 apce 477 watts 50A 10v
11x7 apce 509 watts 60A 9.6v
11x5.5 apce 508 watts 50.8A 9.2v
8X6 APCE 391 watts 47.9A 9.2v
useing zippy r 2500 21 c 3 cell
turnigy 40amp esc
i think i will stick to the 8x6 or get a bigger esc, motor got slightly warm but not enough to worry about nice product.
23 people like this review.
|
|
|
HXT 35-36A 1450Kv Brushless Outrunner.
Juan Andrés
I have one HXT 35-36A 1450Kv Brushless Outrunner to my new exprimental aerobatic epp aircraft is to much and very very good performance excelent value for money, testing whit one HXT D9 2200mAh 3S 20-30C lipo pack
and mounting 9x6 propeller 380 wat. and one thrust 1.860grs. EXCELENT, I loven it, have bought a few for myself and so have some of my friends.
13 people like this review.
|
|
|
| Put it in a Parkzone T-28 Trojan. Used recommended 9x6 JXF prop and it HAULS ASS! Its a real HOT ROD now! You'll be thrilled you upgraded with this puppy! Also used Turnigy Plush 30 Amp ESC and 20-30C Flightmax Battery. Don't try the stock prop as it is too much for this motor. Don't forget to order a prop adapter (Item TPSA-4MM). You will need to ream the prop hole larger. Use a prop reamer. Drilling wont do it. I also tried a 35-36C (Lower RPM). Its not anywhere near as exciting as this faster motor. The 1100 is nice, but not massive unlimited vertical that I got out of this faster motor. Look in the customer community forum as I will post how to mount it in a T-28.
10 people like this review.
|
|
|
| best performance with a 10-7 prop gettin 480 watt and 48+amps doesent even get warm good
9 people like this review.
|
|
|
| Purchased unit for a power glider - flying weight 3 pounds. This replaces an AXI 2808/24 & then a Himax 2816 motor. All used a 2100mAh 11.1v Li-poly battery with a 25a ESC. I now have a rocket with wings. Vertical flight/wingovers/immelmans are now a part of flightplan. I now fly at 30% throttle with vertical & inverted flight now possible. Flight time is over 10 minutes with combo & throttle management. 5-star match made for the sky's the limit!
6 people like this review.
|
|
|
| just got my motor, installed it in my parkzone t-28 with 9x6E APC prop, flew with it this morning and WOW!!, tons of power. Great motor, for an even better price.
6 people like this review.
|
|
|
Really great motor.
Quality is perfect and power enough.
Used it on a 2m glider with a 10x6 prop and 8.4NimH battery.
5 people like this review.
|
|
|
Wow! Bought this to replace the Park-480 in my ParkZone T-28 Trojan, which only weighs 900g or so. Holy smokes - with the stock 9.5x7.5 prop it just goes straight up all you want.
I had to change the timing on my ESC up one notch from the (default) lowest setting or it screeched if I hit WOT suddenly.
5 people like this review.
|
|
|
| Very good engine for the GEMINI. Much reserve of power. Give whole satisfaction
5 people like this review.
|
|
|
Better to use this rocker on 2S lipo's.
This in combination with a APC 80*38 prop gives plenty of power, and an amp draw of 26 amps. On 3S lipo, I can only give 50% throttle, amp draw exceeds above 30 amps (and my speedcontrollers don't like that.)
4 people like this review.
|
|
|
Hello HC Fans,
I am using this power machine with the H9 5s 2300mAH Lipo in my Multiplex FunJet. Well, it is a little tricky to mount the motor, because there is little space. The FunJet weight is now 870g and i use a APC Speed 6,5x5. Ulimited vertical speed!!! I am loving it...
4 people like this review.
|
|
|
| Good product. Price / quality-excellent.
4 people like this review.
|
|
|
I'm very pleased with this motor , i've fitted in my SU27Flanker 1mtwingspan 1,2kgr ..
ESC 60A Turningy Lipo 3s 2200 APC 8,5x5 reading 30Amps at full power , APCE 9x6 reading 43 Amps at full power , very good even under 46A load gets just slightly warm...
3 people like this review.
|
|
|
| This is an excellent motor. I have it in a overweight Mini-Telemaster on 3cell 2200 with 9x3.8 prop, Extra 2 cell Lion for custom Lights for night flight. Plane comes in about 3 lbs. This motor will pull the plane vertical at 3/4 throttle. I have be careful of the torque sometimes at take off because it is so much fun to watch people's reaction to my 3 foot runway.
3 people like this review.
|
|
|
| Powerful, smooth running motor. Power my 1.4kg model with ease. Like it :-)
3 people like this review.
|
|
|
Great product at a low price. Good quality and fast shipping. I have used this motor TR 35-36A 1450kv Brushless Outrunner to power my E Flight 260 Extra from Hanger 9. Needed to make small motor mount adjustments to the plane as the plane is built for the E Flight 480 outrunner. After that no other modification was necessary
I chose the 10x5 apc prop as suggested on Hobby City’s website with a 2100mAh Hobby City Lipo 30c battery. Now I have seen planes fly with the standard setup and let me tell you, no match to the setup I have used. Vertical performance, unbelievable. The high KV rating of the motor gives a lot of speed that gives a huge advantage with some aerobatic maneuvers such as knives edge loops.
On the down side, high kv motors have got bigger power consumption, thus less flying time. Other than that I can really recommend this combination.
3 people like this review.
|
|
|
this is a good motor looks good
i put it on my butter fly 30 amp
speed con. 2 1500 amp batterys on
a good day 30 min flite time.
flts grate !!!
2 people like this review.
|
|
|
Good power... 400w using 3s Zippy 2500 20c on a 8x6E. Drew about 45a.
It even stayed reasonably cool during that 3 minute torture test.
Overall, pretty good motor.
However, mine is out of balance somewhere... vibrates terribly and is plenty noisey!
2 people like this review.
|
|
|
I bought TR 35-36A 1450kv Brushless Outrunn and TR_S40A TURNIGY Sentry 40amp Speed Control.
It is very strong power and very smooth. I installed it into greatplanes Lancair. It was over powerd and very fast. Everything is much much better than I expected. I love it Thanks
A++++++++++++++++++++++++
2 people like this review.
|
| Click here to see all reviews |
5 crowns 
