HobbyKing Online R/C Hobby Store : TURNIGY BESC Programming Card

View all comments | (91 threads)

17/08/2010
rlilayu (71%)
Turnigy and Eurgle is same thing??, is compatible with this brand to? (like Hobbywing, Thunderpower, Turnigy and OEMRC Sentilon)??? thank you

znarfcram (66%)
Well, after a little searching on Google, I couldn't find any reference to the Eurgle brand of programming card. It does seem like Turnigy shares some re-branded products with Eurgle. Not sure what you mean by the second part of your question. Do you mean does the Turnigy card work with those brands of ESC's?

31/07/2010
JackChen (57%)
Does it work with the Mystery brand of ESC's?

18/07/2010
phil74 (56%)
Hy Guys.
I have this card and the Turnigy 120a Aquastar ESC. But, i can not programming with this Card! Why?
Greets

berrykooiman (-4%)
Most probably you connect it wrong. If the ESC doesn't has BEC you need an additional battery connected to programming card.

eclipce (76%)
did you check the polarity of the wire into the programming card?

Daniel (86%)
Just found the same issue and got my answers here (hope it helps) ***********rcuniverse****/forum/m_9713898/anchors_9713898/mpage_1/key_/anchor/tm.htm#9713898

13/07/2010
cpkoh (25%)
Can this Turnigy programming card set the HK-SSH50A or HK-SSH70A series ESC ?

19/06/2010
phil333 (24%)
Hi, if this card works with hobbywing ESC's. Does anybody know whether hobbywing programming card works with Turnigy ESC's?

MONICA ALEJANDRA (47%)
muy util para programar los ESC

phil333 (24%)
It's ok, I've found out that basically they are the same cards.

mrkokes (37%)
Yes it works with HK (programmable) series. I have teste it on Hobbyking SS Series 25-30A ESC (card programmable).

Tony A. (48%)
Yes, they are the same card.

Nate5583 (50%)
Just used mine with an 80amp turnigy plush esc

angel1 (58%)
Hello, I have a pentium 30 amp made by hobbywing and program it with program card that looks very similar to this Turnigy one. I tried to use it to do a Turnigy esc and it did not work. I was disappointed. Maybe you will have better luck.

Asad (95%)
It should.

SeaHawk (84%)
doesnt work with mine HK 40A esc

4/04/2010
maestros (50%)
Can i use the programming card with the Skyartec ESC???
(It's the Cessna 182 i bought here).

Joxson (56%)
This is for Turnigy Bec:s and Esc:s, so I dont think so.

sajc7 (34%)
Preis/Leistung TOP!

flash242424 (93%)
I think u cant

bagera (50%)
you can always try and you will find out by yourself :)

fathead431 (59%)
no, it doesnt work.

avivik (20%)
YES YOU CAN. I don't know why everyone here say you can't. Did you try it? Do you have the ESC he's talking about?
I just did it yesterday, and it works perfectly.

pahomov.evgen (37%)
Excellent . All is convenient and pleasant!. I am very happy.

Oscar (38%)
most say that yes it works with almost any ESCs

somchai6813 (10%)
How to config the Lipo-Cells..

Inakto (35%)
I believe i used this to program my cessna. made it play different music :)

giodonk (46%)
No, it did not work on mine. I was hoping it would, but none of the lights on the programming card lit up. Thinking I had a faulty card, I ordered a second prog card with the same results. I ended up having to use the transmitter throttle stick and tones to program it.

28/03/2010
Carlcox89 (56%)
Does anyone knows if Futaba 8FG battery works on the programming card? I'm asking this because my battery says 7.2VDC

Helmut (47%)
Do not use a 7.2v battery
6v max only.

Julius (52%)
I don't recommend to use this battery as a power supply for the BESC card. 6V is maximum.

Joxson (56%)
The card wants only 5 volt, so you need a resistor in that case!

flash242424 (93%)
Hi Carlcox, it will work dont worry

haijorno (74%)
7.2 its like 7.4....

seanpaul (42%)
Hi. I would not try it. The most esc's give up 5-6V. at around 2A. This means its designed for reciever current which means 4-5 cells, i.e. 4.8 - 6 volts. Only special recievers take more. This applies also to esc's. The 8FG pack is for your transmitter. Do you want to risk damaging your esc and possibly your prog. card? I wouldn't. Paul

Eduardo (53%)
the voltage of battery correct is 4.8 to 6v.

angel1 (58%)
Hello, 6 volt max or you can burn it up. Thanks

26/03/2010
Allan (69%)
Reply: Allan (5 points)*
I program my esc 80 amp plush to 5s and it plays music as well, did I program the music or the number of cells? or both? if ever both can I turn off the music? Thanks!

Joxson (56%)
You did only program the music, you cant program number of cells in that one!

Allan (69%)
It was programmed to 5s with music, a friend of mine help me, if you program it to a certain number of cell it will play a corresponding music as well. You CAN program the number of cells, thanks for the reply though.

Joxson (56%)
Wrong the programcard can only program number of cells on those who have HL in their name. It�s what they say in the manual. I can reply agen when I�m home, then I can write exactly whats in the manual!

flash242424 (93%)
Hi, yes u definitly can turn the music off

Allan (69%)
Joxson-Turnigy plush is compatible with this program card.
Flash24-how can you turn it off without changing the #of cells you programmed.

skyripper (26%)
on the program card you can shut off the music but the start up beeps are going to play when you power up the esc.

seanpaul (42%)
Hi, Regardless if you programmed both or not. Yes you can turn of the music. But you can also change the music melody. The melody is important though as it tells you a lot. The best is to experiment to find the setup you prefer. To keep it quiet, put a pillow over it. Paul

artg111 (75%)
Yes you can turn the music off just plug the program card back in and scroll down to the music and press the right / left arrows till there are no light in the music line on and press the ok button.

mikec@aloha.net (18%)
just got my card. it can program HK programmable esc but not mystery and bphobby esc's. you cannot program #of cells* just choose lipo or nmih. that's all. quite simple. the default program on my esc was off. happy i had this little gadget set my esc to the right parameters. great start up songs. will test the esc in my plane (clouds fly) tomorrow.

25/03/2010
slowstick400 (66%)
Does this Card work on Tower Pro H40A ESC to set programing

Julius (52%)
I don't think so.

flash242424 (93%)
Hi, i think not

Bas123 (40%)
some people say it does, haven't tried it out jet

radialarm (28%)
It worked on my H40A.

radialarm (28%)
It worked with my H40A

matches12323 (25%)
No it will not. It will work on the Turnigy series though. -Tyler

Shea (36%)
yes works very well, but do not forget to set throttle curve

scott74dog (16%)
My buddy uses my card to program that esc.

seanpaul (42%)
Hi, Try it. It doesn't hurt if you connect it properly. I have tried various esc's with divers prog. cards. somtimes they work and sometimes not. Moreover they do if they look the same. Most of them do. I hav not had any damage to date. Paul

makis (31%)
yes, i have the same esc and all works fine and you can programming it to play music. you will love it!!!

lolsen (-18%)
i dont think so, you need the same brand **>turingy

artg111 (75%)
I have used this card with the Tower Pro H40A ESC and it works just fine.

angel1 (58%)
Yes it does work and very well. Thanks

Ceolwulf (42%)
Yes it does I used it to program my towerpro h40a. You can even program it to play music on startup with it.

21/02/2010
elytoros (81%)
questi o io
speed controller turnigy plus 18a is ( e)compatible.
speed controller turnigy plus 30a is ( e) compatible
speed controller mistery 30a not (no )compatible,
speed controller mistery 100a not (no )compatible,
speed controller artech 30a not (no )compatible,

21/02/2010
papo (59%)
ciao non si riesce a creare una lista completa dei compatibili

elytoros (81%)
per il momento o notato che e compatibile solo con i turnigy,invece i mistery,artech no

This customer was awarded a credit for their answer.

elytoros (81%)
per il momento o notato che e compatibile solo con i turnigy,invece i mistery,artech no

16/02/2010
Peter (23%)
Does it work with the Turnigy 85A ESC?

Miles-away (72%)
No, look at the related articles of the ESC. There you'll find the right programming card.

This customer was awarded a credit for their answer.

Glenn (32%)
When will this be in stock again?
1 month has passed already since my order

Joxson (56%)
short anwser: YES! :D

matches12323 (25%)
In theory, yes, it should. -Tyler

seanpaul (42%)
Hi, Why not? sure it must. It works on the Turnigy 80A. Paul

lolsen (-18%)
i think so, its the same brand!

Riff (45%)
This programming card DOES NOT work with Turnigy K-Force 40A (heli)

Riff (45%)
You have to be more cpecific about the ESC, I know that it does not work with Turnigy K-Force 40A... Lights activate and it seems like it is working but actually it does not change settings.

10/02/2010
osse9 (59%)
Will this work with KDS ESC?

matches12323 (25%)
No it will not. Will work with the Turnigy series though. -Tyler

lolsen (-18%)
i dont think so!

31/01/2010
elytoros (81%)
speed controller turnigy plus 18a is compatible.
speed controller turnigy plus 30a is compatible
speed controller mistery 30a not compatible,
speed controller mistery 100a not compatible,
speed controller artech 30a not compatible,

7/01/2010
Grunta13 (50%)
you guys might want to check this if you haven't seen it.
***********hobbycity****/hobbycity/forum/uploads/8848/Turnigy_ESC_Progam_Card_Manual.pdf
it says DO NOT POWER CARD WITH OVER 6V. No mention I can see of anything else. My rx is powered by the BEC from the esc so I don't have any option but to get a 4.8v rx baterry or something before I try and blow the p/board.

cra$her (56%)
Will the Card be powered by the BEC of the ESC?
then the Battery would not matter, because the BEC Voltage is always 5V.

HibridOPT (66%)
what's the problem to connect the card with the BEC? BEC usually goes up to 6v so there isn't any problem.

16/12/2009
mitchh (60%)
Que veux dire la ligne 8 mode governor ,merci

5/12/2009
wingsiuho (57%)
Apart from the difference in price, what other differences between this one and the other one in black.

wingsiuho (57%)
I think I know the answer. They are for different ESC. I made a mistake in ordering the black one with the intention of using it to program a Turnigy Plush ESC. It didn't work. I should have ordered this white one. Not paying attention to the compatibilty list stated above.

1/12/2009
kcartwright27 (56%)
This work with the hobbyking super simple series ?thanks

Stewart (49%)
No it doesn't

matches12323 (25%)
No it will not. Some people have used it, but most people can't get it to work with it. -Tyler

itiKGlitch (34%)
not sure

25/11/2009
WILY27 (44%)
that would have to buy cable for connecting the battery cables to the card drive?
if they put better link
thanks

itiKGlitch (34%)
use the esc cable to rx connect to the card

lolsen (-18%)
you dont need a exstra battery, it works with the BEC of the controler

Eduardo (53%)
it depends, if you connect with a esc who have a internal bec, you dont need a external battery. if you have to programing a esc without a bec , you need feed the programing card with something who gives a 4.8v to 6v.

19/11/2009
bastelspezi (53%)
does anyone know if i can turn the turnigy controllers into governer mode with this? well surely i can but will it work in governer mode then because it nowhere says the turnigy controllers have governer mode!

haijorno (74%)
if the esc not have gov you can not turn it on. you do not have what to turn on :)

2/11/2009
rjpradella (47%)
I have some doubts about this card and ask that someone help me* - It is for many programming? - What is the battery voltage needed to program it? - It has to be always the same brand of Controllers?

bastelspezi (53%)
it clearly says:
Compatible with H-Wing, OEMRC and TURNIGY Speed Controllers.
you will either need a 4,8V batt for non-BEC or just the BEC from the ESC,.. following?

lolsen (-18%)
It hast to be the same brand, yes.
I yused a 4.8 volt battery but it will wortk with the BEC of the Controler i remember.

Eduardo (53%)
the voltage you need for this is the same voltage you feed your RX (4.8 to 6v)*But you just need this when you programing a esc without a inside bec.

30/10/2009
eezfly (59%)
Will this card work with a turnigy 120a-HV-OPTO esc

bastelspezi (53%)
yes it should, it'll work with all turnigy controllers

This customer was awarded a credit for their answer.

lolsen (-18%)
Yes, think so !

20/10/2009
Bmongo (58%)
Do I need to program for different # of cells I.E. 3cell
vs 4 cell. The card has # of cells and music on same programming number. Instructions say for 4 cells I need ode to joy music to play???? is that correct?
Please help :)
PLEASE!!!

bastelspezi (53%)
nope, the music-section is only for non-HV controllers. when you have a HV.controller you can set the amount of lipo-cells there - i guess there will be no music then. and as far as i understand the instructions, you can't set it to 4cells. from 2-4cells its automode. 5 and up then is available.

bastelspezi (53%)
so i guess the non-HV controllers always are in auto-cell-count-mode. or you just set it to NiMh and have a totally different cut-off scheme: 0%-45%-60% of initial voltage - i use that for lifepo4!

13/10/2009
pawel (32%)
Witam czy ten programator dziaa z innymi regulatorami -jak tak to z jakimi. Ja chce zakupic Tower Pro .Dzieki za info

Jacek (29%)
Dzisiaj sprawdzilem, dziala bez problemow z TowerPro 25A (zoltym)

[That works successfully with the TowerPro 25A (yellow)]

pahomov.evgen (37%)
Excellent programator. All is convenient and pleasant!. I am very happy.

5/10/2009
Flashback (32%)
It is works for Turnigy K-Force?

25/09/2009
animalada (45%)
Simplemente esta tarjeta no funciona.
Es la segunda que compro en unos meses y ninguna de las dos han llegado a funcionar, a pesar de leer y hacerlo como dice el manual, siguen sin funcionar. Es un producto que no comprar jamas. (0 points)

16/09/2009
deleted (48%)
When I plug a battery into my card (both with and without the ESC plugged in) it doesnt light up at all .. any one else had this. I have tried a number of batteries. Is this card dead?

Thanks

calvin (41%)
i had the same problem first but i redo it like, rx ni-cd batt 4.8v plug to prog card batt slot.next plug in esc plug to prog card bec slot.next plug lipo batt deans to esc deans.and works for me till now.hope tis helps.

oldtimer (82%)
hey I might give a try an see what happens..thankx

deleted (48%)
tried that ..didnt work for me.

Schletzer (40%)
I tried that too. It didn't work for me. :-(

Allan (69%)
I program my esc to 5s and it plays music as well, did I program the music or the number of cells? or both? if ever both can I turn off the music? Thanks!

Allan (69%)
Sorry wrong post, this is an intended question and not a reply.

14/09/2009
oldtimer (82%)
I got this card on Friday,wired it up as per diagram minus 6v batery. ESC is a Turnigy 40amp sentry with Bec.Plugged battery to ESC and most of the lights came on with the connectting light as well.Is this card dead....Cause I also tryed to program the ESC via transmitter but all it does is play tones over an over with nothing else happening. Has anyone else had this happen to them?Can anyone Plz help..Many thankz

oldtimer (82%)
Also my card is lit up like what's shown on the product photo

wastegate (67%)
My card worked fine for a while but is now doing the same as yours. I tried it on another ESC just to confirm it's the card and it is.

Schletzer (40%)
My card worked fine for two times but is now doing the same as yours. I tried it on another ESC just to confirm it's the card and it is.

What can I/we do???

ardo2 (70%)
Same here, worked on to program 2 ESC and now a lot of lights are like on the product photo.

How to reset??

feliba (49%)
Same probleme here after programming two ECS's all the lights light up like on the picture above. I'm not happy with it..

bthanse (74%)
Same here. Worked fine first time. Now some weeks later. the led light up like picture. Nothing happend when push buttons.

Lesch (67%)
The same happened to me. I used it on two different PLUSH ESC, now most of the lights are on permanently including the blue connection led.

Mister HK: Would happend the same when ordering a new unit??

tankd0g (30%)
Tested with Tower Pro 25-30A?

feliba (49%)
HK, would you please give a statement to this problem?!

14/09/2009
river9988 (52%)
Wondering if any chance this programming card will work with Mystery 40A Brushless Speed Controller (Blue Series)
Anyone tried this before?

9/09/2009
Bmongo (58%)
Do I need to program for different # of cells I.E. 3cell
vs 4 cell. The card has # of cells and music on same programming number. Instructions say for 4 cells I need ode to joy music to play???? is that correct?
Please help :)

Bmongo (58%)
Using all Turnigy ESC I have 2 60A 3 30A a40A
I have a few 4 cell batteries do I need to reprogram the esc when I use them??

7/09/2009
murat (56%)
does this card work with Hobbyking SS Series 50-60A ESC ? cause I have both and could not run them yet..do i have to connect motor to esc to use this program card ?

5/09/2009
Mogli (89%)
the manual-link is dead...
where can I find the manual?
is this card working with every turnigy esc?
which of the turnigy esc supports governour mode?

zillom (61%)
Yes it working with al turnigy series.
And yes he support governor mode

4/08/2009
Austin (25%)
Will this card work with the Turnigy brushless 18A w/ reverse ESC?

1/08/2009
gullwing713 (44%)
Does anyone know if this works with TowerPro H40A Brushless Speed Controller

Stuart

19/07/2009
UrsusRF (28%)
Can i program EZ-RUN esc with this card?

18/07/2009
GimpyGolden (56%)
Has anyone got one of these to work on a Turnigy 80Hv Marine Esc?

29/06/2009
mentorpilot (47%)
HELMUT

DaRippa (59%)
yeah i thought the same...

26/06/2009
peterkortens (65%)
Is the programming card suitable for use with a 3S1P A123 9.9v battery pack?

25/06/2009
manuel (71%)
Esta targeta programadora es super facil de usar no necesitas el manual es intuitiva , es mas simple que el mecanismo de un chupete
Saludos

Click here to see all comments